Router 1200W with 3 pcs. router bits | PRM1021

Precise routing is done with the FERM PRM1021 router. With an output of 1200 Watts, you can effortlessly make trenches and profile edges in harder woods. The cutting depth of this machine can be selected by using the depth adjustment, with a maximum depth of 35 millimetres. The maximum diameter is 32mm and the shaft holder of the router is 6 or 8mm. This makes it possible to use 6 and 8 mm router bits.

Depending on the material, the speed can be variably adjusted (9,000 to 30,000 RPM). With this router, changing the cutters is very easy due to the shaft locking on the machine. The soft grip handles and the possibility to connect a vacuum cleaner ensure that you can work comfortably and dust-free. The included parallel guide makes it possible to cut straight lines and nice circles. With the supplied router bits, you can get started right away.

- Mains voltage 230-240V~, 50Hz
- Power input 1200W
- No load speed 9.000-30.000/min.
- Max. cutting depth 35mm
- Max. cutter diameter 32mm

- Depth adjustment 
- Electronic variable speed control 
- Dust extraction connector 
- Spindle lock 
- 3m cable


Contact your reseller

Includes: Parallel guide - Centring pin - Template guide - Spanner - 3pcs bit set - 6mm+8mm collet
Optional Accessories: Router bit set 20pcs PRA1008 - Router table PRA1011
Availability: Ex-works + FOB

More Information
Gross weight 4.8333
Max. cutting depth 50 mm
Max. cutter diameter 32 mm
Collet diameter 6 + 8 mm
Power input 1200W
No load speed 9.000 - 30.000
Mains voltage 230V~
Frequency 50Hz
Includes Parallel guide, Centring pin, Template guide, Spanner, 3pcs bit set, 6mm + 8mm collet
PRM1021_MANUAL (11.94 MB)