Impact drill 800W - 13mm | PDM1052

With this FERM PDM1052 impact drill, your drilling job is done in no time. Thanks to its dual function, this impact drill is suitable for drilling and impact drilling in wood, metal and (soft) concrete. The impact drill is equipped with a 3 meter rubber cable for optimum freedom of movement.

The 800W impact drill has a double function, so if you can't get through the material in the regular drilling position, the impact setting is the perfect solution! Always drill to the desired depth thanks to the supplied depth limiter. The speed of the drill can be adjusted variably thanks to the speed control in the switch, so you can choose the right speed for the job and the material to be machined. Even with long-term use, this impact drill is pleasant to work with thanks to the ergonomic design with soft grip handle and the lock-on switch.

Where is this impact drill suitable for?
Thanks to its double function, this impact drill is suitable for the following tasks:

- Drilling in wood
- Drilling in metal
- Impact drilling in masonry and other types of stone
- Impact drilling in (soft) concrete

- Mains voltage 230V~, 50Hz
- Power input 800W
- No load speed 0-3.000/min.
- No load impact rate 0-48.000/min.
- Chuck capacity 2-13mm

- Double function (drilling and impact drilling)
- Depth limiter
- Variable electronic speed control
- Lock-on switch
- 3m rubber cable



Contact your reseller

Availability: Ex-works + FOB

More Information
Gross weight 2.6480
Chuck capacity 2-13mm
No load impact rate 0-48.000/min
Power input 800W
No load speed 0-3.000/min
Mains voltage 230 - 240 V~
Frequency 50Hz
Includes Side handle - Depth limiter - Chuck key
PDM1052_MANUAL (16.42 MB)